The Ford 260 cubic-inch V-8 engine was born out of Lee Iacocca’s curiosity in Ford manufacturing unit-sponsored racing. Starting life because the 221 cubic-inch V-8, the 260 was introduced in 1962 and quickly inspired the Ford high-performance 289 cubic-inch V-8. The distributor may must be changed through the engine’s lifetime. Changing inventory distributors with a efficiency fashions can be common. Installing a new distributor within the Ford 260 cubic-inch V-8 to is a simple task, easily accomplished solo with easy tools.
Ford 260 CI V8 Distributor Installation Instructions
1. Disconnect the adverse battery cable from the battery before eradicating the old distributor. Pop the clips holding the cap to the previous distributor and remove the cap, retaining the spark plug wires intact on the cap. Utilizing a wrench, loosen the maintain-down bolt on the distributor’s base.
2. Pull the hose off the vacuum advance unit situated on the side of the distributor. Take away the rotor at the middle of the distributor and pull the distributor out.
3. Insert the brand new distributor into the engine. The brand new distributor will go in simply, presumably requiring a slight jiggle to mesh the gears. Put the new rotor on the cam in the center of the distributor. Don’t move the distributor as soon as installed.
4. Clip the brand new cap on the distributor and connect the spark plug wires one at a time, according to their place on the previous distributor.
5. Re-attach the negative battery cable and regulate the timing utilizing a timing light. When the engine is correctly timed, tighten the distributor maintain-down bolt and put the vacuum advance again on the distributor.